🪽✨ Motorcycle Angel Wings Projector Lights – Light Up Your Night Ride!
🪽✨ Motorcycle Angel Wings Projector Lights – Light Up Your Night Ride!
Free Shipping $59.99+
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
Make the ground
part of the look.
A pair of compact projectors adds a wing-shaped light pattern beside your motorcycle after dark.
2 projectors
One coordinated setup
3 colors
White · Red · Blue options
9V–45V
Wired vehicle power
Before you order: check your vehicle’s supply voltage, a secure mounting position and cable routing. This is a wired decorative accessory; compatibility depends on your motorcycle or electric scooter’s setup.
Make it your style: choose White, Red or Blue projection. Every option pairs the same black housings with your selected light color.
The effect comes
to life after dark.
Watch the red and white ground patterns in the supplied footage. The light spreads outward beside the motorcycle, adding a distinct wing-shaped accent.
Red and white projection footage.
Same black housing.
Your choice of projection.
Go for a crisp white pattern, a bold red accent or a vivid blue finish. Choose your projection color from the product options.
Three projection color options are offered. Choose the color you want when ordering.
A different view
from every angle.
The street footage shows the wing pattern from behind and beside the bike. Ground texture, surrounding light and mounting angle all influence the appearance.
White projection shown in the supplied street footage.
Two ways to mount.
Start with a secure fit.
Use adhesive mounting on a suitable surface, or screw mounting where the bracket can be securely attached. Plan both lights together so the projected patterns sit where you want them.
One light on each side.
Aim the pair down and outward so the patterns spread to the left and right. The illustration shows a placement concept; the secure mounting points depend on your vehicle.
-
Check the space
Keep the lights and wiring clear of wheels, suspension movement and hot components. Confirm that each lens has a clear path to the ground.
-
Choose the attachment
For adhesive mounting, use a clean, dry, compatible surface. For screw mounting, check that the mounting location and hardware can hold the bracket securely.
-
Check the finished setup
Follow the supplied wiring instructions. Test the projection while parked and check the attachment and cable routing before use.
One less battery
to keep track of.
The projectors use your vehicle’s electrical supply, so there is no separate projector battery to replace. Check the voltage and arrange the connection to suit your vehicle.
A wired connection is required. If you are unsure about your vehicle’s electrical system, have a qualified installer handle the connection.
IP67-rated housing.
Protect the connections, too.
The projector housing is specified as IP67 for dust and water protection. Make sure the wiring connections are also properly protected as part of the installation.
The housing rating does not describe unprotected wiring joints or connectors.
Small lights.
A look that reaches beyond the bike.
The black cylindrical housings keep the accessory compact. Each has a front projection lens, a mounting foot and a rear power lead.
A two-piece set in your selected projection color.
Open the box.
Meet the pair.
The Angel Wings box keeps the components together in a fitted foam layout, with the paired lights, adhesive pads and wiring in separate spaces.
A place for each component.
The packaging view shows the left and right projector units above the mounting pads, with the wiring arranged in the lower compartment.
- 2 projector lights
- 2 adhesive pads
- Wiring harness
- Mounting hardware
From unboxing to the light effect.
See the box opened, the mounting work and the white projection in the supplied clip.
Unboxing, installation and white-light demonstration.
Know what you’re fitting.
Product type
Motorcycle ground projection light set
Projection pattern
Angel wing / fan-shaped ground effect
Set quantity
2 projector lights
Other components shown
2 adhesive pads, wiring harness and mounting hardware
Projection options
White, Red or Blue
Housing color
Black across all color options
Input voltage
9V–45V
Power
Wired vehicle electrical connection
Mounting methods
Adhesive or screw mounting
Housing protection
IP67
Decorative auxiliary lighting only. Keep all required vehicle lights in place, and check the lighting rules that apply to your location and intended use.
A few useful answers.
Is this one lamp or a pair?
The product is offered as a 2-pack: two projector lights in the projection color you select.
Are the housings different colors?
No. All three options use black housings. White, Red and Blue refer to the projected light color.
Will the lights fit my motorcycle or scooter?
Check the 9V–45V input range, the available mounting surfaces, ground clearance and cable routing on your vehicle. Fitment depends on the vehicle’s electrical and mounting setup.
How will the projection look on the ground?
The pattern is most noticeable in low light. Mounting position, projection angle, ambient lighting and the ground surface affect the appearance. The scene images illustrate the effect.
Do I need to charge the lights?
No separate projector battery needs charging or replacing. The lights require a wired connection to a suitable vehicle electrical supply.
Can these replace my normal vehicle lights?
No. These are decorative auxiliary projectors. They do not replace headlamps, tail lamps, turn signals or other required lighting. Check local requirements before using colored auxiliary lights.
White, red or blue.
Make it your own.
Select your projection color and plan a secure, compatible installation for your motorcycle.
