⚡ 12V 100W Powerful Self-Priming Oil Pump
⚡ 12V 100W Powerful Self-Priming Oil Pump
Free Shipping $69.99+
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
Change the Oil Without Crawling Under the Car.
Pull used oil out from above through the dipstick tube. No jack. No ramp. Less floor-level mess. Connect the pump, position the hose and let the motor do the pulling.

Why Make a Simple Oil Change Harder Than It Needs to Be?
Traditional draining means getting underneath the vehicle, dealing with the drain plug and trying to catch used oil before it ends up everywhere. This pump changes the job by extracting from above.
Pure Copper Motor. Steady Pull.
The 100W motor runs at 2,800 RPM, giving the pump consistent power for routine oil extraction.

Built Tough. Sealed Tight.
The pump head uses aluminum alloy for better wear resistance and a sturdier working surface around the fluid path.

Push-in connections and the outlet clamp help hold the hose firmly while making the intended flow direction easier to follow.

One Pump for More Than One Machine.
Designed for oil extraction across vehicles and equipment using compatible access points and the correct battery-system voltage.

Available for 12V or 24V battery systems. Confirm the correct version and a suitable extraction access point before use.
Thick Oil Moves Slower. That’s Normal.
Cold, heavy oil naturally flows more slowly. Slightly warming the oil before extraction can improve flow. If the used oil contains visible debris, use a suitable filter before it reaches the pump.

Setup Is Straightforward.
The visual guide shows the full process. Before switching on, these are the three things that matter most.

Small Details That Make Garage Use Easier.
The power connection is simple, and the coiled cable helps keep the setup easier to manage between jobs.

1.8 m coiled power cable: extends when needed and stores more neatly afterward.

Copper-plated alligator clips: designed for direct connection to the vehicle battery.
- Turn the engine off before extraction.
- Slightly warm oil can help improve flow, but do not operate on a running engine.
- Do not use with gasoline, diesel, alcohol, water or other flammable / unsupported liquids.
- Use a suitable filter if the oil contains visible debris or impurities.
- Check polarity before switching on: red to positive, black to negative.
- Confirm the correct 12V or 24V version for your battery system.
Technical Specifications
Everything important in one place — without repeating another specification image.
Keep the Oil Change Off Your Back.
For DIY maintenance, this pump turns a messy under-car drain into a much more direct top-side extraction job.
